Tag Archive for: metal buildings colorado
Steel Church Building in Aurora, Colorado
Metal Building Outlet supplied this steel church building in Aurora, Colorado in April, 2014. This building features steel components from Nucor and is used as an church in Arapahoe County, about 30 miles from Strasburg and 10 miles from Denver.
This church building is 60’x100’x14’ and features a 3:12 pitch on the roof. Since the Denver Metro region is well known for its variations in climate (heat, cold, severe weather), this church building is rated for wind speeds up to 100 MPH and roof snow loads of 30 PSF.
For Colorado contractor click here
Metal Building in Parker, Colorado
Parker, CO
Metal Hangar Building in Longmont, Colorado
Longmont, CO
Steel Building in Wiggins, Colorado
Metal Building Outlet supplied this steel building in Wiggins, Colorado in May, 2014. Occasionally, after purchasing a metal building, the original owner forfeits the building due to various reasons, including the inability to receive proper building approval, etc. This building was one which had been forfeited by the original owner and due to this, Metal Building Outlet was able to provide this building as a warehouse for the current owner at a significant discount. Additionally, Metal Building Outlet was able to offer assistance on freight for these Nucor components.
With instances such as these, there may be issues with getting the building up to code, since it may have been ordered for another purpose, with different specs and often with different requirements to meet local building codes. Our experts can help by working with the building department (as we did in this instance) to reduce headaches and meet all of your local building codes.
To meet the demands of this building in north eastern Morgan county (about 15 miles from Ft. Morgan and about 40 miles from Greeley), this building has wall insulation as well as wind and snow ratings appropriate to the climate. The walls are insulated with high efficiency R-32 double layer (6” + 4”) insulation and the warehouse is rated for wind speeds up to 110 MIP and a snow load of 32 PSF.
This building has exterior walls that are fern green and a galvalume roof with a 1:12 pitch. The warehouse is 60x100x16’ it has a 12’x14’ overhead door and a 3’x7’ walk door.
For Colorado contractor click here
Metal Building in Woodland Park, Colorado
Metal Building Outlet supplied this steel building in Woodland Park, Colorado in January, 2014. This building features steel components from Nucor and is used as a shop and storage for the owner’s tractors and other equipment about 20 minutes from Manitou Springs and Colorado Springs.
This shop/storage is 30’x40’x16’3” and features (8) 34”x6’3” windows, a 3’x7’ walk door and a 16’x14’ insulated heavy duty overhead door for easy access to the interior by the equipment.
The roof on this building is galvalume and has a 1:12 pitch. In order to accommodate the optional high efficiency R-38 double layer (6” + 6”) insulation on the roof, a purlin depth of 10” was used and thermal blocks were added to the entire roof. The walls are also insulated with a single layer of 6” R-19 insulation. Along with the heavy insulation package for the climate of eastern Teller County, this steel building has ratings for wind speeds of 90 MPH and can the roof can bear a snow load of 40 PSF.
For Michigan contractor click here
Airplane Hangar Building in Longmont, Colorado
Metal Building Outlet supplied this steel building in Longmont, Colorado. This building was purchased in October, 2013 and is used as an aircraft hangar. This Nucor building is about 30 miles from Denver and Fort Collins in Boulder County on the northwest side of the Denver Metro Region.
This building has a finished size of 68’x63’x25’ and a large 50’x17.5’ bi-fold door as well as two 4’x7’ steel walk doors. The building will have a partial mezzanine as well. The snow load for the 1:12 pitched roof is 30 PSF and the building has a wind rating of 120 MPH.